Empirical phenotyping and genome-wide association study reveal the association of panicle architecture with yield in Chenopodium quinoa.

Chenopodium quinoa manifests adaptability to grow under varying agro-climatic scenarios. Assessing quinoa germplasm's phenotypic and genetic variability is a prerequisite for introducing it as a potential candidate in cropping systems. Adaptability is the basic outcome of ecological genomics of crop plants. Adaptive variation predicted with a genome-wide association study provides a valuable basis for marker-assisted breeding. Hence, a panel of 72 quinoa plants was phenotyped for agro morphological attributes and association-mapping for distinct imperative agronomic traits. Inter simple sequence repeat (ISSR) markers were employed to assess genetic relatedness and population structure. Heatmap analysis showed three genotypes were early maturing, and six genotypes were attributed for highest yield. The SD-121-07 exhibited highest yield per plant possessing green, glomerulate shaped, compact density panicle with less leaves. However, SJrecm-03 yielded less exhibiting pink, intermediate shape, intermediate density panicles with less leaves. The phenotyping revealed strong correlation of panicle architecture with yield in quinoa. A genome-wide association study unraveled the associations between ISSR makers and agro-morphological traits. Mixed linear modes analysis yielded nine markers associated with eight traits at p ≤ 0.01. Moreover, ISSR markers significantly associated with panicle shape and leafiness were also associated with yield per plant. These findings contribute to the provision of authenticity for marker-assisted selection that ultimately would support quinoa breeding programs.

Rural households' livelihood adaptation strategies in the face of changing climate: A case study from Pakistan.

Rural and agricultural communities' adaptation to climate change has gained significant attention owing to many countries' vulnerability to climate change risks. A similar trend has been witnessed in South Asia, a highly climate-vulnerable region, where research has grown dramatically considering the agriculture sector's vulnerability to climate-induced disasters. However, little attention has been paid to the adaptation of the livelihoods of rural households. This research, therefore, takes the case of Pakistan to explore livelihood adaptation strategies of rural households to climate change and investigate the factors that expedite or halt the adoption of livelihood diversification strategies. A multistage sampling design is used in this research, where 480 rural households from the Punjab province of Pakistan were selected and interviewed using stratified and random sampling approaches. A multivariate probit (MVP) regression model is employed to analyze the factors affecting households' adoption of livelihood adaptation strategies. The results show that besides adaptation of agronomic operations (agricultural adaptation strategies), rural households in the study area employed a wide range of strategies to adapt their livelihoods to climate change. These strategies include poultry and livestock farming, value addition of farm produce, trading of animals and farm commodities, small businesses (shops, etc.), daily wage labor, horticultural crop farming, and non-farming jobs. The estimates of the MVP model revealed that respondents' education, household size, income, access to a credit facility, access to farm advisory services, and access to climate forecasts have significantly influenced the choice of livelihood adaptation strategies. Based on these findings, this research recommends that the authorities should make efforts to improve farmers' understanding of the adaptation of climate change risks and educate them to adopt multiple livelihood options to improve the resilience of their livelihoods to climate-induced risks. This research has important policy implications for other countries with similar socio-economic features.

Discovery and development of COVID-19 vaccines and therapeutics: nonclinical perspectives.

The development and regulatory review of BNT162b2, a COVID-19 vaccine, and PaxlovidTM (nirmatrelvir tablets/ritonavir tablets), a COVID-19 therapeutic, are benchmarks for accelerated innovation during a global pandemic. Rapid choice of the SARS-CoV-2 spike protein and main protease (Mpro) as targets for the vaccine and therapeutic, respectively, leveraged the available knowledge of the biology of SARS-CoV-2 and related viruses. The nonclinical immunogenicity and safety of BNT162b2 was rigorously assessed. Likewise, a comprehensive nonclinical safety assessment was conducted for the therapeutic candidates, lufotrelvir (PF-07304814) and nirmatrelvir (PF-07321332). The development and regulatory review of BNT162b2 and Paxlovid was enabled through close collaboration of the pharmaceutical industry with regulatory agencies and public health organizations. This experience highlights approaches that could be adopted for pandemic preparedness including risk-based investment strategies, conduct of activities in parallel that normally are conducted sequentially, quick kill decisions, simultaneous evaluation of multiple candidates, and use of flexible, established vaccine platforms.

Technological Advancement and Trend in Selective Bioanalytical Sample Extraction through State of the Art 3-D Printing Techniques Aiming 'Sorbent Customization as per need'.

The inherent complexity of biological matrices and presence of several interfering substances in biological samples make them unsuitable for direct analysis. An effective sample preparation technique assists in analyte enrichment, improving selectivity and sensitivity of bioanalytical method. Because of several key benefits of employing 3D printed sorbent in sample extraction, it has recently gained popularity across a variety of industries. Applications for 3D printing in the field of bioanalytical research have grown recently, particularly in the areas of miniaturization, (bio)sensing, sample preparation, and separation sciences. Due to the high expense of the solid phase microextraction cartridge, researcher approaches in-lab production of sorbent material for the extraction of analyte from biological samples. Owing to its distinct advantages such as low costs, automation capabilities, capacity to produce products in a variety of shapes, and reduction of tedious steps of sample preparation, 3D printed sorbents are gaining increased attention in the field of bioanalysis. It is also reported to offer high selectivity and assist in achieving a much lower limit of detection. In this review, we have discussed current advancements in different types of 3D printed sorbents, production methods, and their applications in the field of bioanalytical sample preparation.

RF energy harvesters for wireless sensors, state of the art, future prospects and challenges: a review.

The power consumption of portable gadgets, implantable medical devices (IMDs) and wireless sensor nodes (WSNs) has reduced significantly with the ongoing progression in low-power electronics and the swift advancement in nano and microfabrication. Energy harvesting techniques that extract and convert ambient energy into electrical power have been favored to operate such low-power devices as an alternative to batteries. Due to the expanded availability of radio frequency (RF) energy residue in the surroundings, radio frequency energy harvesters (RFEHs) for low-power devices have garnered notable attention in recent times. This work establishes a review study of RFEHs developed for the utilization of low-power devices. From the modest single band to the complex multiband circuitry, the work reviews state of the art of required circuitry for RFEH that contains a receiving antenna, impedance matching circuit, and an AC-DC rectifier. Furthermore, the advantages and disadvantages associated with various circuit architectures are comprehensively discussed. Moreover, the reported receiving antenna, impedance matching circuit, and an AC-DC rectifier are also compared to draw conclusions towards their implementations in RFEHs for sensors and biomedical devices applications.

Reconstruction of soft tissue defects of hand: A systematic approach.

Background and Objective: A thorough insight into the management of hand injuries can shape the approach of a surgeon in order to achieve optimal outcomes for the patients. The aim of this study was to share our experience in reconstruction of the hand and establishing an algorithm for classification and treatment of hand injuries. Methods: This is a descriptive cross sectional study and was conducted from January 2020 to August 2022 at Burns and Plastic Surgery center, Peshawar. Data was collected from medical records about the patient demographics, mechanism of injury and type of procedures done. Defect size was classified into small (<5cm), medium (5cm to 10 cm) and large (>10cm). The defect site and size was cross tabulated against the method of soft tissue reconstruction in order to make the algorithm for reconstruction of hand injuries. Data was analyzed using SPSS. Results: The study population included 41 (75.9%) male and 13 (24.1%) female patients, mean age 31.56±14.1. Machine injuries (33.3%) and electric burns (24.1%) were the most common cause of hand soft tissue defects. The most commonly performed flap was Posterior introsseous artery (PIA) flap, followed by First dorsal metacarpal artery (FDMA) flap. Flap necrosis was observed in three cases (5.6%). Conclusion: This treatment algorithm for coverage of soft tissue defects in hand injuries will help with the decision making process of hand reconstruction and has didactic value for novice surgeons. It will also form the foundation for further work on this aspect of hand injuries.

Synthesis and analysis of silica nanocarriers for pectinase immobilization: Enhancing enzymatic stability for continuous industrial applications.

Pectinolytic enzymes are among the important group of industrial enzymes that have wide applications in different food industries. In this study, pectinase-based silica nanocarriers were synthesized using co-precipitation and cross-linking techniques. The resulting silica nanoparticles were investigated using scanning electron microscopy (SEM), energy-dispersive electron microscopy (EDEX), and X-ray diffraction (XRD) for determination of its morphology, elemental composition, and crystalline pattern. Under the optimal immobilization conditions like 1.5 % glutaraldehyde, 3000 IU/mg pectinase concentration, 90 min immobilization time and 40 °C immobilization temperature, pectinase showed maximum immobilization yield. The immobilization of pectinase onto the silica nanocarriers led to enhanced catalytic characteristics, displaying higher enzymatic activity across various temperature and pH levels compared to soluble pectinase. Moreover, the immobilization substantially improved the temperature stability of pectinase, exhibiting 100 % of its initial activity even after 120 h of pre-incubation at 50 °C. Additionally, the silica nanocarrier pectinase retained 100 % of its original activity even after being reused 10 times in a single batch of reactions. These findings indicate that the immobilization of silica nanocarriers effectively enhances pectinase's industrial capabilities, making it economically feasible for industrial use and an efficient system for various biotechnological applications.

Enhancing specimen collection skills for dried blood spots through an immersive virtual learning environment: a cross-sectional study.

OBJECTIVE: The quality of dried blood spot (DBS) specimens impacts newborn screening (NBS) results, hence proper training is crucial for DBS specimen collection. To address this, a training module for Allied Health Professionals (AHPs) and nurses was created on Moodle, a virtual learning environment (VLE). The purpose of this research was to determine the feasibility and effectiveness of this module. METHODOLOGY: Participants were trained on-site (March to December 2019), through online training sessions (January to June 2020), and the two training strategies were compared. Data analysis included the total number of participants, cost-effectiveness, trainer engagement, and the number of unacceptable samples collected by nurses/AHPs trained by the two strategies. RESULTS: A total of 55 nurses/AHPs were trained on-site, while 79 nurses/AHPs completed the online module and received certificates through online VLE-based training. The trainer engagement and cost were more for onsite training. After online training, the specimen rejection rate was reduced from 0.84% (44 rejected out of 5220 total specimens collected) to 0.38% (15/3920). CONCLUSIONS: This study shows that using VLE-based DBS specimen collection training is feasible and effective for training nurses and AHPs.

Green Synthesis of Low-Glycemic Amylose-Lipid Nanocomposites by High-Speed Homogenization and Formulation into Hydrogel.

In this research, we focused on the production of amylose-lipid nanocomposite material (ALN) through a green synthesis technique utilizing high-speed homogenization. Our aim was to investigate this novel material's distinctive physicochemical features and its potential applications as a low-glycemic gelling and functional food ingredient. The study begins with the formulation of the amylose-lipid nanomaterial from starch and fatty acid complexes, including stearic, palmitic, and lauric acids. Structural analysis reveals the presence of ester carbonyl functionalities, solid matrix structures, partial crystallinities, and remarkable thermal stability within the ALN. Notably, the ALN exhibits a significantly low glycemic index (GI, 40%) and elevated resistance starch (RS) values. The research extends to the formulation of ALN into nanocomposite hydrogels, enabling the evaluation of its anthocyanin absorption capacity. This analysis provides valuable insights into the rheological properties and viscoelastic behavior of the resulting hydrogels. Furthermore, the study investigates anthocyanin encapsulation and retention by ALN-based hydrogels, with a particular focus on the influence of pH and physical cross-link networks on the uptake capacity presenting stearic-acid (SA) hydrogel with the best absorption capacity. In conclusion, the green-synthesized (ALN) shows remarkable functional and structural properties. The produced ALN-based hydrogels are promising materials for a variety of applications, such as medicine administration, food packaging, and other industrial purposes.

Mucoid degeneration of the anterior cruciate ligament corrected with autograft reconstruction.

The anterior cruciate ligament (ACL) is the most frequently injured knee ligament, typically in non-contact athletic injuries in young adults. Mucoid degeneration of the ACL (ACL-MD) is an uncommon ACL pathology in which glycosaminoglycans deposition within the collagenous bundles leads to hypertrophy, loss of full knee flexion and knee pain without instability. ACL-MD usually presents in individuals over 40 years with sudden-onset knee pain after minimal trauma or as an incidental MRI finding. ACL-MD is rarely described in young adults. We present a case of ACL-MD in a previously healthy adult in his early 20s who presented with 3-month recalcitrant dull left knee pain and limited range of motion after 'stepping funny' with slight twisting. This case highlights the need to critically reflect on the anatomical structures when presented with musculoskeletal pathologies and to consider the unique presentation of musculoskeletal disease in atypical age groups.

Reconnoitering NGOs strategies to strengthen disaster risk communication (DRC) in Pakistan: A conventional content analysis approach.

Risk communication is crucial since individuals need to understand how they are at risk and what proper steps to deal with flood events. Sharing information with the public opens the door for two-way communication about risks, wherein you learn about people's perspectives and work together to find ways to mitigate the risks. Beyond government scope, relief organizations play a big part in advising individuals about the likelihood of catastrophic events as they possess the commonalities that define community engagement. In numerous accounts of devastating events, the failure of risk management groups to coordinate their efforts and the public's mistrust of relief agencies are highlighted. One possible explanation for this skepticism could be relief organizations' failures in communicating risks. In addition, individuals' lack of skills and experience with catastrophes has left rural residents unprepared, which is why relief agencies need to raise their efforts or measures to communicate with people about possible risks. If these measures are uncovered, it could improve public communication and provide information for formulating recommendations to prevent fatalities. This study identifies the strategies used by relief organizations in enhancing disaster risk communication across four severely affected districts in Khyber Pakhtunkhwa, Pakistan. The qualitative research used semi-structured interviews with 50 participants from relief organizations, local institutions, and affected households. We employed qualitative content analysis and NVivo software to analyze the data. The findings of this study highlighted some significant strategies that relief organizations adopted in this line of work: the administration of educational and information transmission, managing obstacles in communication, and managing inter-organizational communications. The findings validate the potential for relief organizations to become change agents, facilitate communication between the public and relief organizations, and ultimately strengthen community resilience and reduce disaster risks as part of local responses.

Non-contrast CT synthesis using patch-based cycle-consistent generative adversarial network (Cycle-GAN) for radiomics and deep learning in the era of COVID-19.

Handcrafted and deep learning (DL) radiomics are popular techniques used to develop computed tomography (CT) imaging-based artificial intelligence models for COVID-19 research. However, contrast heterogeneity from real-world datasets may impair model performance. Contrast-homogenous datasets present a potential solution. We developed a 3D patch-based cycle-consistent generative adversarial network (cycle-GAN) to synthesize non-contrast images from contrast CTs, as a data homogenization tool. We used a multi-centre dataset of 2078 scans from 1,650 patients with COVID-19. Few studies have previously evaluated GAN-generated images with handcrafted radiomics, DL and human assessment tasks. We evaluated the performance of our cycle-GAN with these three approaches. In a modified Turing-test, human experts identified synthetic vs acquired images, with a false positive rate of 67% and Fleiss' Kappa 0.06, attesting to the photorealism of the synthetic images. However, on testing performance of machine learning classifiers with radiomic features, performance decreased with use of synthetic images. Marked percentage difference was noted in feature values between pre- and post-GAN non-contrast images. With DL classification, deterioration in performance was observed with synthetic images. Our results show that whilst GANs can produce images sufficient to pass human assessment, caution is advised before GAN-synthesized images are used in medical imaging applications.

PEGylated Graphene Oxide as a Nanodrug Delivery Vehicle for Podophyllotoxin (GO/PEG/PTOX) and In Vitro α-Amylase/α-Glucosidase Inhibition Activities.

This study aims to develop a nanodrug delivery system containing podophyllotoxin (PTOX), a known anticancer drug, loaded on graphene oxide (GO). The system's ability to inhibit α-amylase and α-glucosidase enzymes was also investigated. PTOX was isolated from Podophyllum hexandrum roots with a yield of 2.3%. GO, prepared by Hummer's method, was converted into GO-COOH and surface-mobilized using polyethylene glycol (PEG) (1:1) in an aqueous medium to obtain GO-PEG. PTOX was loaded on GO-PEG in a facile manner with a 25% loading ratio. All the samples were characterized using FT-IR spectroscopy, UV/visible spectroscopy, and scanning electron microscopy (SEM). In FT-IR spectral data, GO-PEG-PTOX exhibited a reduction in acidic functionalities and there was an appearance of the ester linkage of PTOX with GO. The UV/visible measurements suggested an increase of absorbance in 290-350 nm regions for GO-PEG, suggesting the successful drug loading on its surface (25%). GO-PEG-PTOX exhibited a rough, aggregated, and scattered type of pattern in SEM with distinct edges and binding of PTOX on its surface. GO-PEG-PTOX remained potent in inhibiting both α-amylase and α-glucosidase with IC50 values of 7 and 5 mg/mL, closer to the IC50 of pure PTOX (5 and 4.5 mg/mL), respectively. Owing to the 25% loading ratio and 50% release within 48 h, our results are much more promising. Additionally, the molecular docking studies confirmed four types of interactions between the active centers of enzymes and PTOX, thus supporting the experimental results. In conclusion, the PTOX-loaded GO nanocomposites are promising α-amylase- and α-glucosidase-inhibitory agents when applied in vitro and have been reported for the first time.

Impact of green technological innovations on environmental quality for Turkey: evidence from the novel dynamic ARDL simulation model.

The contribution of this research is to provide empirical evidence that investing in green technology innovation (GTI) can reduce the ecological footprint in Turkey, which can lead to sustainable economic growth and environmental quality. The research also highlights the importance of controlling energy consumption, GDP, trade openness, and urbanization, as these variables have a positive or negative effect on ecological footprint. The findings of this research can be useful for the Turkish government, policymakers, and environmentalists to promote the implementation of GTI and eco-friendly resources, which can reduce the impact of climate change and contribute to economic prosperity. Overall, this research provides important information for decision-makers to adopt policies that prioritize green innovation and environmental protection in Turkey.

Dual Graft Living Donor Liver Transplantation for High Acuity Patients: A Single-Center Experience.

Background: The outcomes of dual graft living donor liver transplantation (DGLDLT) in high acuity patients remain underreported. The objective of this study was to report long-term outcomes from a single center in this select group of patients. Methods: This was a retrospective review of patients who underwent DGLDLT between 2012 and 2017 (n = 10). High acuity patients were defined as patients with model for end stage liver disease (MELD) ≥30 or Child Pugh score ≥11. We looked at 90-day morbidity and mortality and 5-year overall survival (OS). Results: The median MELD score and Child Pugh score were 30 (26.7-35) and 11 (11-11.2). The median recipient weight was 105 (95.2-113.7) and ranged from 82 to 132 kg. Out of 10 patients, 4 (40%) required perioperative renal replacement therapy, and 8 (80%) required hospital admission for optimization. The estimated graft to recipient weight ratio (GRWR) with right lobe graft alone was <0.8 in all patients, between 0.75 and 0.65 in 5 (50%) patients, and <0.65 in 5 (50%) patients. The 90-day mortality was 3/10 (30%), and there were 3/10 (30%) deaths during long-term follow-up. Among 155 high acuity patients, the 1-year OS with standard LDLT, standard LDLT with GRWR <0.8, and DGLDLT was 82%, 76%, and 58%, respectively (P = 0.123). With a median follow-up of 40.6 (1.9-74.4) months, the 5-year OS for DGLDLT was 50%. Conclusion: The use of DGLDLT in high acuity patients should be prudent and low GRWR grafts should be considered a viable alternative in selected patients.

Morphology and Performance Enhancement through the Strong Passivation Effect of Amphoteric Ions in Tin-based Perovskite Solar Cells.

Despite the optoelectronic similarities between tin and lead halide perovskites, the performance of tin-based perovskite solar cells remains far behind, with the highest reported efficiency to date being ≈14%. This is highly correlated to the instability of tin halide perovskite, as well as the rapid crystallization behavior in perovskite film formation. In this work, l-Asparagine as a zwitterion plays a dual role in controlling the nucleation/crystallization process and improving the morphology of perovskite film. Furthermore, tin perovskites with l-Asparagine show more favorable energy-level matching, enhancing the charge extraction and minimizing the charge recombination, leading to an enhanced power conversion efficiency of 13.31% (from 10.54% without l-Asparagine) with remarkable stability. These results are also in good agreement with the density functional theory calculations. This work not only provides a facile and efficient approach to controlling the crystallization and morphology of perovskite film but also offers guidelines for further improved performance of tin-based perovskite electronic devices.

Robotic versus freehand CT-guided radiofrequency ablation of pulmonary metastases: a comparative cohort study.

PURPOSE: Radiofrequency ablation (RFA) is a curative treatment option for small lung metastases, which conventionally involves multiple freehand manipulations until the treating electrode is satisfactorily positioned. Stereotactic and robotic guidance has been gaining popularity for liver ablation, although has not been established in lung ablation. The purpose of this study is to determine the feasibility, safety, and accuracy of robotic RFA for pulmonary metastases, and compare procedures with a conventional freehand cohort. METHODS: A single center study with prospective robotic cohort, and retrospective freehand cohort. RFA was performed under general anesthesia using high frequency jet ventilation and CT guidance. Main outcomes were (i) feasibility/technical success (ii) safety using Common Terminology Criteria for Adverse Events (iii) targeting accuracy (iv) number of needle manipulations for satisfactory ablation. Robotic and freehand cohorts were compared using Mann-Whitney U tests for continuous variables, and Fisher's exact for categorical variables. RESULTS: Thirty-nine patients (mean age 65 ± 13 years, 20 men) underwent ablation of 44 pulmonary metastases at single specialist cancer center between July 2019 and August 2022. 20 consecutive participants underwent robotic ablation, and 20 consecutive patients underwent freehand ablation. All 20/20 (100%) robotic procedures were technically successful, and none were converted to freehand procedures. There were 6/20 (30%) adverse events in the robotic cohort, and 15/20 (75%) in the freehand cohort (P = 0.01). Robotic placement was highly accurate with 6 mm tip-to-target distance (range 0-14 mm) despite out-of-plane approaches, with fewer manipulations than freehand placement (median 0 vs. 4.5 manipulations, P < 0.001 and 7/22, 32% vs. 22/22, 100%, P < 0.001). CONCLUSIONS: Robotic radiofrequency ablation of pulmonary metastases with general anesthesia and high frequency jet ventilation is feasible and safe. Targeting accuracy is high, and fewer needle/electrode manipulations are required to achieve a satisfactory position for ablation than freehand placement, with early indications of reduced complications.

Silicon-Induced Morphological, Biochemical and Molecular Regulation in Phoenix dactylifera L. under Low-Temperature Stress.

Climate changes abruptly affect optimum growth temperatures, leading to a negative influence on plant physiology and productivity. The present study aimed to investigate the extent of low-temperature stress effects on date palm growth and physiological indicators under the exogenous application of silicon (Si). Date palm seedlings were treated with Si (1.0 mM) and exposed to different temperature regimes (5, 15, and 30 °C). It was observed that the application of Si markedly improved fresh and dry biomass, photosynthetic pigments (chlorophyll and carotenoids), plant morphology, and relative water content by ameliorating low-temperature-induced oxidative stress. Low-temperature stress (5 and 15 °C), led to a substantial upregulation of ABA-signaling-related genes (NCED-1 and PyL-4) in non Si treated plants, while Si treated plants revealed an antagonistic trend. However, jasmonic acid and salicylic acid accumulation were markedly elevated in Si treated plants under stress conditions (5 and 15 °C) in comparison with non Si treated plants. Interestingly, the upregulation of low temperature stress related plant plasma membrane ATPase (PPMA3 and PPMA4) and short-chain dehydrogenases/reductases (SDR), responsible for cellular physiology, stomatal conductance and nutrient translocation under silicon applications, was observed in Si plants under stress conditions in comparison with non Si treated plants. Furthermore, a significant expression of LSi-2 was detected in Si plants under stress, leading to the significant accumulation of Si in roots and shoots. In contrast, non Si plants demonstrated a low expression of LSi-2 under stress conditions, and thereby, reduced level of Si accumulation were observed. Less accumulation of oxidative stress was evident from the expression of superoxide dismutase (SOD) and catalase (CAT). Additionally, Si plants revealed a significant exudation of organic acids (succinic acid and citric acid) and nutrient accumulation (K and Mg) in roots and shoots. Furthermore, the application of Si led to substantial upregulation of the low temperature stress related soybean cold regulated gene (SRC-2) and ICE-1 (inducer of CBF expression 1), involved in the expression of CBF/DREB (C-repeat binding factor/dehydration responsive element binding factor) gene family under stress conditions in comparison with non Si plants. The current research findings are crucial for exploring the impact on morpho-physio-biochemical attributes of date palms under low temperature and Si supplementation, which may provide an efficient strategy for growing plants in low-temperature fields.

Variations in Total Protein and Amino Acids in the Sequenced Sorghum Mutant Library.

Sorghum (Sorghum bicolor) is the fifth most important cereal crop worldwide; however, its utilization in food products can be limited due to reduced nutritional quality related to amino acid composition and protein digestibility in cooked products. Low essential amino acid levels and digestibility are influenced by the composition of the sorghum seed storage proteins, kafirins. In this study, we report a core collection of 206 sorghum mutant lines with altered seed storage proteins. Wet lab chemistry analysis was conducted to evaluate the total protein content and 23 amino acids, including 19 protein-bound and 4 non-protein amino acids. We identified mutant lines with diverse compositions of essential and non-essential amino acids. The highest total protein content in these lines was almost double that of the wild-type (BTx623). The mutants identified in this study can be used as a genetic resource to improve the sorghum grain quality and determine the molecular mechanisms underlying the biosynthesis of storage protein and starch in sorghum seeds.

Pathophysiology and human cancer risk assessment of pharmaceutical-induced thymoma in carcinogenicity studies.

Thymoma, a tumor of thymic lymphocytes or thymic epithelial cells (TECs), is a common spontaneous tumor in Wistar Han rats, especially in females with up to 18% incidence in controls. In addition to sex, there are rat strain differences in background incidence of thymomas such as Sprague Dawley versus Wistar Han rats. Human thymomas are very rare and without clear differences in incidence between males and females. Immunomodulatory and anti-inflammatory pharmaceutical drug classes, including Janus kinase inhibitors, increase the incidence of benign thymoma in two-year rat carcinogenicity studies. Potential non-genotoxic mechanisms that might contribute to the pathogenesis of thymoma development in one sex (female) Wistar Han rats include: (1) hormonal differences, (2) high proliferation rate of TECs, (3) delayed physiologic thymic involution, and/or (4) significant level of immunosuppression at high doses of a pharmaceutical drug. Factors to consider in the human cancer risk assessment of pharmaceutical-induced thymoma are: the genotoxicity of the test article, sex and strain of rats, exposure safety margins, and pathophysiologic differences and similarities of thymoma between rats and humans. Totality of weight of evidence approach and available data suggest thymomas observed in carcinogenicity studies of pharmaceutical drugs are not relevant for human risk at clinically relevant therapeutic doses.